come back tools

Cutting angle with template « Etoile »

The template « Etoile » is used for the cut of angle, precis and without measure oh the strip of paper.

- For the bevel at 45° or english bevel.
- For following polygon-

 5 = Pentagon   6 =  Hexagon     7 =  Heptagon    8 =  Octogon   9 = Nonagon.

USAGE OF THE TEMPLATE :
The use is simple, you place the branch of the template in connection with the polygon on the strip oh paper.
Example : Opening of CB (pulp board) in pentagon.( used also the branch n°5).

Operation :
1° : Prepare 5 strips of paper :
widht = 3 cm (ruler of 50cm).      Lenght = opening bevel +3 cm on pulp board.

2° : Cut the let angle of the strip without moving the tool «  étoile ».
IMPORTANT : The marking is placed on the fold of the strip of paper.

3° : Present the strip of paper folded in 2 on the top of the bevel, angle prepared on the leftand mark right angla with a black pencil.

4° : Open again the strip of paper, move the tool « étoile » on the marking and cut.

REMARK :
The template »étoile » allows the preparing of reversed bevels of polygon (5, 6, 7, 8, and 9 sides).

USAGE :    You position the template at the end of the strip of paper.     See photo n°5.

LEGEND OF PHOTO :

Photo n°1 : Overview of template.
Photo n°2 : Left hand cutting.
Photo n°3 : right hand cutting.
Photo n°4 : Overview of dressing bevel.
Photo n°5 : Left hand cutting of reversed bevel.
Photo n°6 : Overview of base pad in pentagon.

Overview of template.	Left hand cutting.
right hand cutting.	Overview of dressing bevel.
Left hand cutting of reversed bevel.	Overview of base pad in pentagon.